Search Site

Technical Notes


Please click on the folder to open its' contents.

In order that we can maintain the highest standard for our hardware and software and documentation, we would welcome your feedback and comments

Search Trio Tech Notes...

This search will open a new window.

General Information...

Motion Coordinators and Hardware...

  • No Notes
Euro 404 / 408
Euro 205x
Euro 209
Encoders / Feedback
I/O, Cables, keypads, etc


Motion ...

Point to Point
Axis Set-up
Machine Applications


Trio ActiveX
Host Link
Serial Comms

Digital Drive Systems ...

Table View ...

AN-360 Panasonic drive
AN-355 Registration on the MC4N.pdf
AN-354 MC664 power and IO terminals.pdf
AN-349 Euro408 Encoder Handwheel.pdf
AN-348 Clear multi-turn data Panasonic RTEX Minas A4-A5.pdf
AN-343 Jogging Axis with the Trio Uniplay HMI.pdf
AN-342 Error loading firmware - SYS on Trio display.pdf
AN-341 Euro 205 to Euro 205X Upgrade.pdf
AN-340 COMBOBOX Dynamic Loading from SD Card.pdf
AN-339 TRIO Controllers communication options.pdf
AN-337 Rotating Product Programming using FRAME 10.pdf
AN-335 GANTRY error compensation.pdf
AN-334 Euro205X to Euro 404-408 Upgrade.pdf
AN-335 GANTRY error compensation.pdf
AN-334 Euro205X to Euro 404-408 Upgrade.pdf
AN-333 BiSS Encoder Support.pdf
AN-332 HEXADECIMAL string to integer.pdf
AN-331 4 wire FRAME compensation.pdf
AN-330 Anybus Modbus Module.pdf
AN-329 Laser Fire Control PWM with ATYPE 36.pdf
AN-326 ARM Controller TCP & UDP Client Connection Support.pdf
AN-320 MOVELINK Base Speed Extension.pdf
AN-318 MC2xx Battery RAM.pdf
AN-315 EtherCAT setup for A5B.pdf
AN-312 Ethernet UDP communications.pdf
AN-309 Transition Curves.pdf
AN-308 Slider Crank FRAME 3.pdf
AN-307 Move Embedded Parameters.pdf
AN-306 4 Axis Palletizing Robot with 1 Axis Wrist.pdf
AN-305 Rotating Product Programming using FRAME 11.pdf
AN-304 Adding TrioPCMotion to VB.pdf
AN-303 Dunkermotoren EtherCAT.pdf
AN-301 PWM Control.pdf
AN-300 PSWITCH limtations.pdf
AN-299 FEC Details MC4 range.pdf
AN-296 MC206X to MC405 Upgrade.pdf
AN-295 Project Encryption in MC4.pdf
AN-294 Integer to Bytes conversion.pdf
AN-293 Cardinal Splines.pdf
AN-292 Configuring A4N.pdf
AN-289 Using Uniplay.pdf
AN-288 P874 with Jacquard Interface.pdf
AN-287 FRAME 17 Multi-Wire Camera Positioning.pdf
AN-286 FRAME 16 XYZ Robot with 2 axis wrist.pdf
AN-285 - Drive Homing for CT EtherCAT.pdf
AN-283 Wireshark Ethernet monitor.pdf
AN-282 Recovery using Boot Loader.pdf
AN-281 TextFileLoader Application.pdf
AN-280 Right hand rule with template.pdf
AN-279 P311 PSWITCH48 Module.pdf
AN-278 EtherCAT Error codes.pdf
AN-277 TextFileLoader.pdf
AN-276 IEC 61131-3 flying shear.pdf
AN-275 Palletising Robot.pdf
AN-274 FILLET function.pdf
AN-272 Fault finding guide.pdf
AN-271 How to check RS232 programming port.pdf
AN-270 MC464 Panasonic RTEX.pdf
AN-269 Stopping Motion.pdf
AN-268 Transfer a Project to new MC.pdf
AN-267 FRAME on PCI card controllers.pdf
AN-266 POWER_UP auto EPROM feature.pdf
AN-265 MC464 SSI sync FPGA.pdf
AN-264 Delta Robot SYNC and USER_FRAMEs.pdf
AN-263 MC464 EMC protection.pdf
AN-261 MC202 - MC302X differences.pdf
AN-260 Special FPGA Versions.pdf
AN-259 Using MC_CONFIG.pdf
AN-258 EtherCAT commands.pdf
AN-257 Replacing MC224 battery.pdf
AN-256 Replacing a controller or firmware.pdf
AN-255 Hostlink_RS422.pdf
AN-254 Euro209 Breakout.pdf
AN-253 Euro205x_Euro209 connections.pdf
AN-252 3D Direction Calculations and MSPHERICALSP.pdf
AN-251 Using module registration as IO.pdf
AN-250 REGIST Command Extensions on MC464.pdf
AN-249 SSI Encoder to Euro205x.pdf
AN-248 Siemens S7, P297 Profibus.pdf
AN-247 ANYBUS Function.pdf
AN-246 Earth and reference voltage terminology.pdf
AN-245 RS23 to TTL.pdf
AN-244 Horizontal Flow Wrapper.pdf
AN-243 Registration MC464.pdf
AN-241 Getting Started with IEC 61131.pdf
AN-233 CANopen compatibility.pdf
AN-232 Frame 1.pdf
AN-231 - Interrupting Autorun.pdf
AN-229 Frame 13.pdf
AN-228 Multiple Ethernet Connections.pdf
AN-227 P201 Pulse and Direction.pdf
AN-226 Feature Code Details.pdf
AN-225 Move Spiral.pdf
AN-224 Channel 0 events for PCMotion ActiveX.pdf
AN-223 Ethernet Connection Tool.pdf
AN-222 Analog Feedback.pdf
AN-221 Vertical Bag Machine.pdf
AN-220 Trio MCLoader Example.pdf
AN-219 Fixing programs in EPROM.pdf
AN-218 Communicating over the command line.pdf
AN-216 Euro205x CAN IO .pdf
AN-215 Upgrading PCMotion Components.pdf
AN-213 MC206X Power Supply.pdf
AN-212 CRC16 Command.pdf
AN-211 Connecting via Ethernet.pdf
AN-210 Maintaining position after WDOG.pdf
AN-209 32 BIT signed conversion.pdf
AN-207 Using Nurbs.pdf
AN-206 Variable Flying Shear.pdf
AN-205 Timer Command(4).pdf
AN-204 SERCOS Setup Wizzard.pdf
AN-203 Trio PC Motion Sample Programs.pdf
TB1204 - P871 Axis Errors.pdf
TB1203 - MC403 - DAC initialisation.pdf
TB1202 - MC403 - MAC Address Reset.pdf
TB1201 - MC464 Boot Loader.pdf
TB0802 EURO209 Design Fault.pdf
TN30_28 - Elmo CANopen DS402.pdf
TN30_27 - In Position Settling using MPOS.pdf
TN30_26 - Path_Generation.pdf
TN30_25 - FESTO CPX CANopen.pdf
TN30_24 - Shift Register FIFO.pdf
TN30_23 - P730_Drive_Controlled_Homing.pdf
TN30_22 - MC302X Hardware Reference(2).pdf
TN30_21 - Estimated MC206 MTBF.pdf
TN30_20 - ServoStar_S300_SERCOS_Registration.pdf
TN30_19 - MC302-K Setup.pdf
TN30_18 - CANopen_to_Elmo(1).pdf
TN30_17 - Look-Ahead MOVES(5).pdf
TN30_16 - The CONNECT command(5).pdf
TN30_15 - MICROSTEP feature in the MC206.pdf
TN30_14 - VB Example using TrioPC OCX(1).pdf
TN30_13 - Step and Direction Interfacing.pdf
TN30_12 - Coordinate Transformation.pdf
TN30_11- CAN Peer_Peer.pdf
TN30_10 - Grounding_for_Profibus.pdf
TN30_09 - MC202 Non volatile memory.pdf
TN30_08 - CAN control protocol.pdf
TN30_07 - Modbus TCP(2).pdf
TN30_06 - Industrial Modems.pdf
TN30_05 - SERCOS commands.pdf
TN30_04 - Ethernet TCP-IP and Modbus TCP(1).pdf
TN30_03 - RS485 Adapter for MC202 P349.pdf
TN30_02 - Serial Ports.pdf
TN30_01 - Connecting to NPN output.pdf
TN20_103 Protection of RS232 port.pdf
TN20_102 MC224 X9 Modification.pdf
TN20_101 Corner Speed Control.pdf
TN20_100 Using Dual Loops(1).pdf
TN20_99 - SD Flash Card Operation(1).pdf
TN20_97 EURO205X Stepper fault.pdf
TN20_96 Frame 10.pdf
TN20_95 P316(1).pdf
TN20_94 Euro1 Euro205x Diff(1).pdf
TN20_93 Euro205X Additional Serial Conn.pdf
TN20_92 Tangential Axis Control(1).pdf
TN20_91 MC224 CAN Chip Update(2).pdf
TN20_90 MC206X Registration(2).pdf
TN20_89 Lexium CANopen(2).pdf
TN20_88 MC302X Pin Out(2).pdf
TN20_87 Analog Input Differences(1).pdf
TN20_86 Stepper with Z(1).pdf
TN20_85 MC to Panasonic Wiring(1).pdf
TN20_84 INCLUDE files(1).pdf
TN20_83 Backlash Compensation(2).pdf
TN20_82 Enabling Individual Axes.pdf
TN20_81 PWM Control(1).pdf
TN20_80 MC206x_Differences(2).pdf
TN20_79 Frame 6(1).pdf
TN20_78 Keypad Keys Stuck(1).pdf
TN20_77 Measuring Speed(1).pdf
TN20_76 FLASHVR(1).pdf
TN20_75 MC206 Capacitor Mod(1).pdf
TN20_74 Ethernet IP(2).pdf
TN20_73 MC206 DAC Reset(1).pdf
TN20_72 Axis Tuning.pdf
TN20_70 Profibus Basic Program(1).pdf
TN20_69 EnDat Absolute Encoders(2).pdf
TN20_68 Enhanced Servo Daughter Board P201(2).pdf
TN20_67 PCI208 Absolute Encoder Interfaces(2).pdf
TN20_66 Analog Input Daughter Board P225(1).pdf
TN20_65 Tamagawa Absolute Encoders(1).pdf
TN20_64 Beckhoff TwinCAT(5).pdf
TN20_63 SERCOS Registration and Homing(1).pdf
TN20_61 Example systems(2).pdf
TN20_60 Communication channel combinations(2).pdf
TN20_59 Remote axis Feature Codes(1).pdf
TN20_58 P151 v P150 Differences(1).pdf
TN20_57 Creating moves with smooth decel(2).pdf
TN20_56 CAN Analog and MC202(1).pdf
TN20_55 Look-ahead buffer(1).pdf
TN20_54 Serial Port Comparison(1).pdf
TN20_53 SERCOS Master Applications.pdf
TN20_52 MC224 and SLM(2).pdf
TN20_51 Piezo Motor Servo(1).pdf
TN20_50 rd_wr CanOpen Params(2).pdf
TN20_49 MC224 Hardware.pdf
TN20_48 Devicenet Command(1).pdf
TN20_47 MC206 Stepper Output(2).pdf
TN20_46 Axis Expander Modification(1).pdf
TN20_45 Using MC206 Flashstick(1).pdf
TN20_44 MC206 system software V1_60(3).pdf
TN20_42 Frame 4 picknplace(2).pdf
TN20_40 MC206 Axis Wiring(1).pdf
TN20_39 MC206 RAM Fault(1).pdf
TN20_38 Frame 5 example(1).pdf
TN20_37 Frame 5(1).pdf
TN20_36 Modbus Toolkit(1).pdf
TN20_35 Registration on cyclic machines(1).pdf
TN20_34 RS485 Comms(2).pdf
TN20_33 stepper+encoder REPDIST(2).pdf
TN20_32 Single Ended Encoders(1).pdf
TN20_31 Profibus P297(2).pdf
TN20_30 Motion Module Pinout(1).pdf
TN20_29b Error Code Table(1).pdf
TN20_28 Modbus RTU(1).pdf
TN20_27 FO Connectors(2).pdf
TN20_26 Fault finding Guide(1).pdf
TN20_25 MC204 V126 System SW loader(1).pdf
TN20_24 Hang on WA(1).pdf
TN20_23 Mini Membrane Control Codes(2).pdf
TN20_22 Negative SPEED values(1).pdf
TN20_21 LOCK and UNLOCK(2).pdf
TN20_20 Sin profile CAM(2).pdf
TN20_19 ReadPacket(2).pdf
TN20_18 FP format in FO network(2).pdf
TN20_17 Simple Can Network(2).pdf
TN20_16 Process Buffers(2).pdf
TN20_15 Bitwise Operators(3).pdf
TN20_14 Axis Expander 5V short(1).pdf
TN20_13 MC216 with Comms db and AxisExp(2).pdf
TN20_12 MC204 System SW Download(1).pdf
TN20_10 IC10 Mod(1).pdf
TN20_09 Assymetric Encoder Signals(1).pdf
TN20_08 Verify on MC202(1).pdf
TN20_07 MC204 FO mod for Serial comms(2).pdf
TN20_06 SSI Absolute Encoders(1).pdf
TN20_05 Single Ended Encoders(1).pdf
TN20_04 DeviceNet(3).pdf
TN20_02 Single Ended Analog Input(1).pdf
TN20_01 loading MC202 system software(2).pdf