P230
 The stepper daughter board generates pulses to drive an external stepper motor amplifier. Single step, half step and micro-stepping drives can be used with the board. All four output signals are opto-isolated on the stepper daughter board and each features overcurrent protection.
Specification |
| Type |
Axis Daughter Board |
| Feedback Device |
N/A |
| Demand Signal Output |
Max output frequency 250kHz pulse and direction. Open collector type |
| Registration |
N/A |
| EMC Compliance |
BS EN50082-2 : 1995 generic noise immunity standard for industrial environment
BS EN55022 : 1995 generic emission standard for light industrial environment |
| |
|
| Fits Into |
Maximum Possible |
| MC224 |
16 (with P301 Axis Expander) |
| MC206X |
1 |
| Euro 205x |
1 |
Features
- Outputs for Step, Direction, Boost and Enable
- Open Collector outputs
- Open Collector outputs
- Step pulse smoothing for consistent output over frequency range
- Pulse width 50% duty cycle. (non return-to-zero)
- Support for standard and microstepping drives
Further information see Chapter 4 of technical
reference manual
|
