P220
The encoder daughter board provides an encoder input without a servo control facility for measurement, registration and synchronization functions on conveyors, drums, flying shears, etc. The encoder port is fitted with high speed differential line-receiver inputs.
The encoder daughter board provides a hardware position capture function for both the encoder Z input and the dedicated 24 Volt registration input. Transitions of either polarity on both these inputs can be used to record the position of the axis at the time of the event within less than 1 micro second. This allows event positions to be captured with very high accuracy for use when coordinating motor axes together.
Specification |
| Type |
Axis Daughter Board |
| Feedback Device |
5V Line Driver Encoder - 1Mhz max edge rate |
| Demand Signal Output |
N/A |
| Registration |
1 x 24V input @ 1us accuracy |
| EMC Compliance |
BS EN61000-6-2 : 1999 generic noise immunity standard for industrial environment
BS EN61000-6-4 : 1995 generic emission standard for light industrial environment |
| |
|
| Fits Into |
Maximum Possible |
| MC224 |
4 (16 with P301 Axis Expander) |
| MC206X |
1 |
| Euro 205x |
1 |
| |
|
| Note: P301 (MC224 Axis Expander) accepts any axis daughter board, but NOT digital drive or fieldbus daughter boards. |
Features
- Opto-isolated A/B quadrature incremental encoder interface
- Differential line-receiver inputs
- 150mA +5v Power output for encoder
- Use as master encoder input / second encoder channel
- Use as master encoder input / second encoder channel
Further information see Chapter 4 of technical
reference manual
|
