Precision Analogue Input Daughter Board printer friendly P225 Trio, a pioneer in the use of modular option daughter boards, adds the P225 to the line up. The P225 provides (8) 16-bit analog input channels for general-purpose use in the range of 0-10Vdc. Analog inputs are now available using the existing CAN Analog Module (P325) via the CANbus link, or using the P225 for faster updates and more resolution. With the P225, users can get all channels of analog data synchronized to the servo loop at 250us. With the addition of a "remote axis" FEC, the P225 can be used to close the servo loop using an absolute voltage for feedback. For example, a two axis analogue / servo system would require a P225 and P702. The P225 is ideal for applications requiring precision torque or force control from an analog transducer. If an unused encoder input is available on the Motion Coordinator, incremental position feedback can also be fed back to the controller for verification of a torque-force axis. The 16-bit resolution and high-speed servo-loop synchronization can give performance previously unattainable in low-cost motion controllers. Specification Type Axis Daughter Board Feedback Device 8 x 0-10V 16bit analogue inputs Demand Signal Output  N/A Registration  N/A EMC Compliance BS EN61000-6-2 : 1999 generic noise immunity standard for industrial environment BS EN61000-6-4 : 1995 generic emission standard for light industrial environment     Fits Into Maximum Possible MC224 16 (with P301 Axis Expander) MC206X 1 Euro 205x 1 Features 8 Channels of 16-bit resolution 0-10Vdc inputs A standard 15-pin D type connector for easy connections. Multiple ground pins for improved signal integrity and ease of wiring. 250us read synchronized with the servo-loop. Fully integrated in the Trio BASIC command set for easy programming. Can be used to close any servo loop axis (requires additional FEC (Feature Enable Code)) Can be used in Trio’s MC206, Euro205X, and MC224 controllers Further information see Chapter 4 of technical reference manual