Trio’s new CAN-16 IO module, the P319 is an ideal low cost replacement for the P316 CAN-16 IO module.
Both modules provide 16 bit-directional 24V Input/Output channels and both run the long-standing Trio CANIO protocol on CANbus which is supported by all Motion Coordinators with a CANbus port.
The P319 also uses less space on the DIN rail than its older cousin, although it should be noted that the connector layout is different, so some changes to cable lengths may be required when installing the new IO module. Here is a summary of the 3 requirements for form, fit and function compatibility.
Trio’s new CAN-16 IO module, the P319 is an ideal low cost replacement for the P316 CAN-16 IO module.
Both modules provide 16 bit-directional 24V Input/Output channels and both run the long-standing Trio CANIO protocol on CANbus which is supported by all Motion Coordinators with a CANbus port.
The P319 also uses less space on the DIN rail than its older cousin, although it should be noted that the connector layout is different, so some changes to cable lengths may be required when installing the new IO module.
Here is a summary of the 3 requirements for form, fit and function compatibility.
| |
P316:
CAN 16I/O Module
|
P319:
CAN 16/IO Module (New) |
|
| Form |
90w x 45d x 110h
Weight: 200g
|
26w x 85d x 130h
Weight: 158g
|
|
| Fit |
Can Port: 5 way screw terminal.
Location: Upper left front
IO ports: 2 x 10 way screw terminal.
Location: Upper right front, lower right front.
(Horizontal, pitch = 5mm)
|
CAN Port: 5 way screw terminal
Location: Top
IO ports: 2 x 10 way screw terminal.
Location: middle front and lower front.
(Vertical, pitch = 3.5mm) |
|
| Function |
Trio CAN IO for MC204 …… MC464.
LENZE CAN Protocol.
CanOpen Protocol.
18 Status LEDs
|
[Y]
[Y]
[N]
[Y]
|
Trio CAN IO for MC204 ……. MC464
LENZE CAN Protocol.
CanOpen Protocol.
18 Status LEDs
|
[Y]
[N]
[Y]
[Y]
|
| |
Output drivers; 250mA per channel.
Max per bank of 8 outputs; 1 Amp
Inputs; 24V opto-isolated.
|
Output drivers; 250mA per channel.
Max per bank of 8 outputs; 1 Amp
Inputs; 24V opto-isolated.
|
|
| |
Back to P316 page |
Back to P319 page |
|
