P242
The hardware PSWITCH daughter board allows 4 open-collector outputs to be switched ON and OFF at programmed positions. This function is similar to the software PSWITCH command which is implemented in the system software and allows outputs to be switched ON and OFF over position sectors. The Hardware PSWITCH daughter board performs the position comparison in electronics hardware on the daughter board. This allows the generated pulses to be very accurately timed.
Specification |
| Type |
Axis Daughter Board |
| Feedback Device |
5V Line Driver Encoder - 1Mhz max edge rate |
| Demand Signal |
N/A |
| Registration |
N/A |
| EMC Compliance |
BS EN50082-2 : 1995 generic noise immunity standard for industrial environment
BS EN55022 : 1995 generic emission standard for light industrial environment |
| |
|
| Fits Into |
Maximum Possible |
| MC224 |
4 (16 with P301) |
| MC206X |
1 |
| Euro 205x |
1 |
| Note: P301 (MC224 Axis Expander) accepts any axis daughter board, but NOT digital drive or fieldbus daughter boards. |
Features
- Rapid generation of rising and falling edge signals.
- Open Collector outputs for 5V to 24V signal levels.
- 4 independently triggered PSWITCH outputs.
- Output response <10 microseconds.
- Low position jitter.
Further information see Chapter 4 of technical
reference manual
|
printer friendly