P871
For use with the latest range of Panasonic MINAS A5N amplifiers supporting the Panasonic Real Time Express (RTEX) network. Allows Plug & Play interconnection with Shielded twisted pair (TIA/EIA-568B CAT5e or more) Ethernet cables.
A single interface supports up to 32 axes of Panasonic MINAS A5N amplifiers. The module comes with 2 axes enabled. Further axes can be enabled with ‘Feature Enable Codes’
See the advantage obtained when Trio's Motion Coordinator MC464 is used with Panasonic A5N Digital drives.
| Specification |
|
| Network |
Ethernet based
MINAS A4N / A5N |
| Network Speed |
100Mbps 1msec or 500usec update operation |
| Topology |
Ring |
| Max Slaves per Interface Ring |
32 |
| Max Interfaces per MC464 |
7 |
| Max Axes per MC464 |
64 |
| Cable |
STP Cat 5-e or Better |
| Bus to MC464 |
32 Bit |
| Registration Inputs |
8 x 24V Inputs + 1 Drive Registration Input / Axis |
| Optically Isolated registration Inputs |
Y |
| Map Any I/O to Any Axis |
Y |
| Supported Modes |
Cyclic Position, Cyclic Speed, Cyclic Torque |
| Axis Feature Enable Codes |
P701, P702, P704, P708, P716, P732 |
Features
- 8 Registration inputs at 100nS per module
- Drive parameters setup from the controller
- Position Set point update 1mS up to 64 axes
- RJ45 Connector
- Ring Topology
- 4 LED status indicators
Back to MC464 main page
Installing your system is easy! Simply connect Power, Motor & Feedback to the amplifier using supplied cables.
Connect motion control & amplifier using network cable with RJ45 connectors and Power up the system.
The MC464 recognises the amplifiers and installs support automatically.
Learn only one Programming Environment for commissioning, programming and accessing the integrated diagnostics available from amplifier & controller.
High reliability deterministic data communications increases reliability and noise immunity of the system.
Trio’s unique Modular Architecture allows you control. 64 Axes under a single coordinate system, you can add whatever drive, motor and feedback type to work in perfect harmony alongside the Panasonic drives.
Increase the performance of your system using the advanced adaptive filters, notch filters and damping control to increase the performance and stability of the motion system. Run the machine at higher speeds and take advantage of the 64 bit integer precise position registers to increase system accuracy.
The support of many Factory communication protocols ensures that factory automation systems can communicate with our equipment. We even have the AnyBus technology enabling support for future communication networks.
We think that Trio Basic will solve all your programming needs, however if you have learnt another standard programming language we support G Code and IEC 61131 programming methods. Your choice! The IEC 61131 runtime is an easy to use full function PLC. Integrated into the Motion Coordinator the runtime kernel allows multiple PLC tasks to be run and has access to all I/O and distributed I/O.
|
