P280
The differential stepper daughter board is a stepper daughter board with the output signals provided as differential 5 Volt signals on a 15 way 'D' connector. The daughter board does not feature an encoder port for position verification, but does have a registration input to allow for capture of the number of step pulses when a registration signals arrives.
Specification |
| Type |
Axis Daughter Board |
| Feedback Device |
N/A |
| Demand Signal |
Max output frequency 500kHz pulse and direction. Line driver type |
| Registration |
1x 24V input @ 1us accuracy (captures outgoing pulse count) |
| EMC Compliance |
BS EN50082-2 : 1995 generic noise immunity standard for industrial environment
BS EN55022 : 1995 generic emission standard for light industrial environment |
| UL Approved |
Yes |
| |
|
| Fits Into |
Maximum Possible |
| MC224 |
4 (16 with P301 Axis Expander) |
| MC206X |
1 |
| Euro 205x |
1 |
| |
|
| Note: P301 (MC224 Axis Expander) accepts any axis daughter board, but NOT digital drive or fieldbus daughter boards. |
Features
- Opto-isolated differential step+direction outputs
- 500kHz maximum step rate
- RS422 Line Driver outputs for Step, Dir, Boost and Enable
- Opto-isolated 5V registration input for external sensor
- Pulse width 50% duty cycle. (non return-to-zero)
- All signals are fully isolated
- UL Apprroved
Further information see Chapter 4 of technical
reference manual
|
